angle valve
英 [ˈæŋɡl vælv]
美 [ˈæŋɡl vælv]
网络 角阀; 角閥; 角形调节阀; 角形阀; 铜角阀
双语例句
- Metallurgical oxygen system pipe system, should use strict degreasing treatment, needle valve flange J29 Angle Pressure Gauge Valve connection.
冶金系统中的氧气管路系统中，宜选用经过严格脱脂处理，法兰连接的针型阀。 - Gate, Globe, Angle and Check Valve Figure Number System.
闸阀，截止阀，角阀和止回阀型号编制体系。 - Optimization of the Angle Valve Internal Flow Path Based on CFD
基于CFD技术的直角截止阀内流道优化 - Relief angle valve. Pressure or vacuum can be specified.
安全角阀。可指定压力或真空度。 - The company mainly produces the products involving PP-R ball valve, angle valve, stop valve, check valve and pipe fittings.
本公司主要生产PP-R球阀、角阀、截止阀、止回阀、管接头等产品。 - ADESUN pneumatic ball valve, pneumatic butterfly valve, electrical ball valve, pneumatic high pressure ball valve, PVC pneumatic ball valve, angle seat valve, and so on.
ADESUN气动球阀，气动蝶阀，电动蝶阀，电动球阀，气动高压球阀、PVC气动球阀、角座阀等。 - Study of Pneumatic Measuring for Cone Angle of Wedged Odd Gate Valve's Lumen
楔式单闸板阀门镀度的气动测量系统研究 - The open angle of the flow control valve is adjusted by electric actuator, which can be controlled remotely to meet the requirement of system measure.
流量控制阀由电动执行器调节开度，可实现远距离控制阀门的开度，以满足系统计量的要求。 - According to structural characteristics of a flapper valve, flapper valves, butterfly valves, ball valves, diaphragm valves, angle valves, through the valve, three-way valve.
根据结构特点有挡板阀、插板阀、蝶阀、球阀、隔膜阀、角阀、直通阀、三通阀。 - The ball-to-pipe diameter ratio governs the handle turning angle at which the valve becomes closed.
圆管子直径比率控制阀门关闭的旋转角度。 - The cross-sectional area of the flow path between mating parts of the traditional 60 ° or 90 ° conical angle needle valve of fuel injector is decreasing towards the interior side. This feature limits the fuel discharge per stroke.
众所周知，传统的喷油器的针阀锥角为60°或90°，它的阀座流道的流通面积向下逐渐减小，这就限制了每循环喷油量。 - Proper use of angle type control valve
角型调节阀的合理使用 - The angle type control valve technological process is simple and its resistance is small, it is directly installed usually.
角型调节阀流路简单、阻力小，一般情况下适用于正向使用（安装）。 - The experiment and calculating example show when concentration of polymer solution increases angle of lag of valve ball opening increases and pump admission coefficient drops.
试验和计算实例表明，随着聚合物浓度的增加，阀球开启滞后角度增大，泵充满系数降低。 - The design of the level flue of the 1# and 2# are different greatly, The distribute of the negative pressure of the level flue is balanced by adjusting the opening angle of the papilionaceous valve of the branch of smoking pipe;
一、二期水平烟道设计有很大不同，调节支烟管蝶阀的开启角度来平衡水平烟道负压分配； - The nose exhalation gastric tube indwelling method could wide the opening angle of nasal valve area and efficiently judge the opening to increase the success rate of the indwelling gastric tube.
呼气法能增大鼻瓣区开口角度并有效判断开口位置，提高置管成功率。 - Some factors such as air/ fuel ratio, ignition advanced angle, compression ratio, valve timing and transmission ratio, which affect the fuel economy of modern car gasoline engines have been studied in depth and the corresponding experiments have been done.
对影响现代轿车汽油机燃油经济性的诸因素，如：空燃比、点火提前角、压缩比、配气相位以及传动比等参数进行了深入的研究及相应的试验。 - On-line Measurement of Chamfer Angle Depth of Cylinder Head Valve Seat
气缸头阀座倒角深度的在线测量 - Besides, it improves the regulation quality of BF top pressure, reduces pressure losses occurred at control angle of speed regulation valve. Therefore the turbine is capable of recovering more pressure energy.
而且，它改善了高炉炉顶压力的调节品质，减少了原来在调速阀控制角度上的压力的消耗，使透平机能够回收到更高的压力能。 - An experimental study on resistance of angle servo valve core
角度伺服阀芯阻力矩的测试与研究 - The reasonable combination of nozzle hole number, impingement angle and valve opening pressure is very important to the new conical spray.
喷孔数、碰撞角度和启喷压力三者的合理配合对第三代伞状喷雾至关重要。 - Design of Continuously Variable Angle Valve Gears
连续可变相位配气机构的设计 - Thermal Analysis for Heat-insulation Structure of High Temperature and Quick-Action Angle Stop Valve
快速热阀隔防热结构的热分析 - It is also obtained from the experiment results that the chamfer angle of the valve seat has great influence to the ball orifice's flow-pressure differential characteristic, however the chamfer length influences less.
阀座倒角对阀口的流量-压差特性的影响较大，而倒角长度对其影响较小。 - Compared the results of theoretical calculation and numerical simulation, the theoretical formula of lagging angle is confirmed. The study results can provide reference for lagging angle design of combined valve. 4.
将理论计算结果与数值模拟结果进行比较，验证了组合阀滞后角理论公式的准确性，可为往复式油气混输泵组合阀滞后角的设计计算提供参考。 - This paper does some theoretical and numerical simulation research about flow field and lagging angle of combined valve, input power of the pump. At last, the operating characteristic of combined valve under gas-liquid two-phase condition is presented.
本文以该泵用组合阀为研究对象，分别从阀内流场、阀滞后角、泵输入功率等方面进行理论分析及数值模拟研究，初步掌握了该组合阀在气液两相工况下的工作特性。 - Analysis focused on the valve timing of exhaust valve opening time, intake valve close time, valve overlap angle, valve lift and intake system parameters on the performance of the engine.
讨论了气门正时中排气门打开时刻、进气门关闭时刻、气门重叠角，气门升程和进气系统参数变化对发动机性能的影响。 - In the system, the variable comes from the sensors are delivered to the microcontroller, the output signal can drive the step-by-step electromotor to adjust the angle of the valve to control each the variable of the system.
本系统中由底层传感器采集来的信息送入单片机进行处理，输出的控制指令驱动步进电机，带动各个阀门的开闭程度进而调整各变量。 - Through the simulation concluded that: hydraulic damping hole diameter, cone angle valve, column, liquid supply pipe diameter, top beam diameter and column stiffness on column uninstall impact significantly.
通过仿真得出：液控口阻尼孔直径、阀芯锥角、立柱直径、供液管路直径、顶梁及立柱刚度对立柱卸载冲击影响明显。